What Is The Difference Between A Cord A Face Cord And Rick Firewood? (Size & Weight)

If you are looking for a product that is both environmentally friendly and easy to use, firewood may be the answer. However, before purchasing any type of firewood it is important to know the basics of cord, face cords, and ricks. This article will tell you everything you need to know about these measurements so that you can make an informed decision when buying wood at your local store or online.

Measuring firewood is a complicated task. It’s not just about the weight, but also the length and diameter of each piece. The three most common measurements are “face cord”, “cord” and “rick”. A face cord is an area that measures 8 feet by 4 feet and can hold up to 16 cubic feet of wood when it is stacked tightly in rows with all pieces touching. A cord is a stack measuring 4 feet by 4 feet by 8 feet high and can contain 128 cubic yards or 128/4=32 cubic feet per row (assuming pieces touch). Lastly, a rick measures 2x2x8 ft or one-half of a full cord.

What Is A Firewood Cord?

A cord of firewood is a standard measure of wood that is propped against the wall in stacks. The stack can be any height, but it must have an even distribution on all sides and will usually rest upon blocks or sawhorses to keep it off the ground where insects can penetrate. A “cord” refers to 128 cubic feet (cf) which equals four by four-foot logs stacked eight feet high with one face of each log touching stem end facing out.Face Cord

Eight feet long, two to four inches in diameter, and split into pieces that are 20-inches or less for easy transport. A cord is not very large when stacked with dimensions at 32 cubic feet which equals one by one-foot logs stacked four feet high with no more than 18″ deep.

A cord of wood is not very large when stacked with dimensions at 32 cubic feet which equals one by one-foot logs stacked four feet high with no more than 18″ deep.

The following sentences will be added below the bullet points or numbers.

What Is The Definition Of A Full Cord Of Firewood?

A full cord is a stack of wood that measures four feet high, eight feet long and four feet deep. This would be 128 cubic ft. or 16ft x fbxh (firewood length).

What Is A Firewood Face Cord?

A face cord of firewood is the same as a full cord, except that it has some pieces which are not four feet long.

What Is A Firewood Rick?

A rick is a pile of firewood that has been formed into a stack for ease of storage or transport.

See also
How to Build a Firewood Rack?

A rick is measured by its length and width. For example, a 16-foot long x 12-inch wide piece of firewood would be considered a one-rick stack.

However, the actual weight of this amount of wood will vary depending on species and moisture content. The average cord weighs between 2500 – 2800 pounds (depending on density).

The following chart provides estimated weights for cords or common stacks:

  • Fireplace cord = stacked at 24″ height x 21″ depth / 128 cubic feet / 85 lbs (face) & 155 lbs (full)
  • Full cord = stacked 44″ height x 48″ depth / 448 cubic feet / 2750 to 3000 lbs (roughly 30 to 35 face cords)
  • Half cord = stacked 24″ height x 36″ depth / 192 cubic feet / 1500 to 1900 lbs (roughly 20 to 25 face cords)

How Much Is A Cord Of Wood?

A cord of wood is 128 cubic feet and weighs between 4000 and 8000 pounds.

A cord is the amount of wood that fits into a space, usually an open topped rectangular area. To visualize this you can equate it to just over eight pallets wide by four high and as long as you need or want. You should also consider how dense your firewood is when trying to determine how much bang for your buck you are getting with one cord compared to another.

What Is A Half Cord Of Firewood?

A half cord of firewood is a random-length stack measuring between 16 and 18 feet long with the equivalent of 128 cubic feet. In this case, it’s also called a face cord or rick of wood. The length may vary depending on how you chop your logs into chunks but an average would be around 12 inches in diameter for a full cord to 15 inches for a half one. This measure refers to freshly cut green firewood that still has its bark intact giving off sap when burned which could make the smoke too smoky.

What Is A Bush Firewood Cord?

Here, the size of firewood is measured by its volume in cubic feet that are contained within a space measuring 128 linear feet with pieces ranging between 12 to 14 inches at their widest point. It’s an informal measure but if you want your wood supplier to comply then it would be best for them to follow this standard as well.

The rick or face cord dimension also applies here which makes up 16-18ft long and about 15in wide (diameter). You can request for longer pieces like 20in especially when you need bigger logs for outdoor furnaces, fireplace inserts and pellet stoves . But generally speaking, both length & width should not exceed more than 18inches each so they don’t burn too fast.

See also
Best Lump Charcoal (2022 Buying Guide)

Wood Weight of a Cord Of Firewood

In general, a cord of firewood is 128 cubic feet. In other words, it would take exactly one standard-sized pick up truck to hold this amount of wood in the bed. That’s because most individual pieces will be four feet long and range from 16 inches wide to 20 inches wide with an average length of 18 inches. This makes for very compact stacks that won’t fit into a larger vehicle or even most smaller SUVs without laying them down on their sides!

Price Of A Cord Of Firewood

  • A cord (or “full cord”) of wood is an amount of stacked firewood, measuring 128 cubic feet. That’s four by four not eight by eight so it fits better on a truck or in your basement!

It is also equal to a stack of wood four feet high, eight feet long and four feet deep.

  • It’s easy to find the price per cord for firewood if you know what size you are looking for! A face cord of firewood is typically 16 inches wide by 24 inches tall with the length being more flexible. That means it’s one foot shorter than a standard rack which makes since because there are fewer rows in height on that pallet style rick of firewood! The best way to get an accurate quote though would be knowing your local market rates but most places ask between $100-$300 depending on where you live and how much they have to deliver or pick up after cutting it down from larger logs.

How Many Face Cords Are There In A Full Cord Of Wood?

  • There are two face cords in a full cord of wood.

In a cord of wood, how many Rick’s are there?

  • There are three ricks in a cord of wood.

How much is that per Rick/Face Cord?

There’s no way to answer this question without knowing where you live, but it’s important to know how the price compares because there isn’t one specific price for each unit! They vary along with your region and what kind of style firewood rack you want (face cords or full cords). For example, if you buy face cords they typically cost around $125-$300 depending on the resources available in your area while full cord prices range from $200-$475! That’s an average difference between buying two different units; it also depends on the size since smaller rick styles will be cheaper than full cord styles.

To summarize, a full cord of wood is 128 cubic feet standing at four by four not eight by eight and it’s also equal to a stack of wood measuring four feet high, eight feet long and four feet deep! A face cord of firewood measures 16 inches wide by 24 inches tall with the length being more flexible (one foot shorter than a standard rack) while there are two in one full cord; three ricks in one cord. There isn’t an exact price for each unit but they vary along with your region and what kind of style firewood rack you want (face cords or full cords). For example, if you buy face cords they typically cost around $125-$300 depending on the resources available in your area while full cord prices range from $200-$475! That’s an average difference between buying two different units.

See also
How To Stack Firewood (Long-Term Storage)

How Long Does A Firewood Cord Last?

A cord of firewood will last anywhere between three to five days on average. However, there are many factors that can influence this estimate including the type of wood burned and its moisture content. When it comes to how long a rick or face cord of wood lasts you’ll find similar results with an average length for them both being one week too.

Conclusion

If you’re looking to buy firewood, it’s important that you understand the different types of wood and sizes. Here are a few terms we’ll be using in this blog for reference: cord (128 cubic feet), face cord (4’x2′), rick (8’x4′). A “cord” is 128 cubic feet; or 4’ x 4’ by 8’ long pieces stacked on top of each other and tightly bound together with rope, twine or wire. This type of measurement can also be called a “rick,” which refers to an entire stack piled up like logs at the lumber yard. When we refer to a “face cord,” we mean one full side of your firewood stack, which is typically 16 inches high and however long the wood pieces are.

Both a cord and face cord can be described as a rick of firewood in some cases since it refers to an entire pile but most commonly we use this term when we’re referring to one half or side of that pile. A full load of firewood is called a cord and half of that is a rick.

If you need to know how long each type of wood lasts, here’s an average: A cord will burn for three to five days; face cords last about one week on average while a pile of firewood measuring eight feet long by four feet high (a rick) averages about a week too.