Wood stoves are an excellent source of heat for homes. They provide a steady stream of warmth that can help keep the temperature in your house consistent, no matter what the weather outside is like. However, wood stoves also make some noise when they are running. The clicking sound you hear is actually caused by the fan inside the stove, which circulates air through it to create more efficiency and heat output. This blog post will discuss why these fans click so often and how this helps your stove run better!
Wood stoves are a popular way to stay warm during the winter. However, many people wonder why they make such an unusual clicking sound when you turn them on. The truth is that it’s just normal for wood stoves to produce this type of noise and there is nothing wrong with your stove because of it!
Why Does A Wood Stove Make A Clicking Sound?
The sound is caused by the roof of the stove expanding and contracting as it heats up and cools down. This expansion and contraction happen many times during a normal day’s usage, so you don’t need to worry about your wood-burning hot enough to cause any damage.
A loud clicking sound may indicate that your log is burning too quickly.
This can be caused by a lack of firewood or too small of pieces. Make sure your wood-burning is fully stocked and that the logs are not too large for your stove.
A loud clicking sound may also indicate some damage to the flue pipe in which you have installed into the chimney. The cracks or holes on this will cause hot gases from inside the fireplace to escape through it as opposed to going up its intended path out of the house. If possible, try covering any holes with aluminum foil until a more permanent fix can be made.
A final source of noise could come from water dripping down onto something metallic within the stove itself, such as one of its valves or fans. In order to determine what area might be making noise when it is exposed to water, you will need to remove the stove pipe and open up what’s inside. Some experts suggest filling a spray bottle with distilled vinegar or alcohol and lightly spraying around each area until an offending sound occurs.
If you find that your chimney needs attention (the flue has holes) do not try to patch them yourself! Call a professional for help as this could be extremely dangerous if done incorrectly.
Why Does My Wood Stove Make Tick Or Click Sounds?
You may have noticed a clicking sound coming from your wood stove or fireplace. It sounds like someone is knocking on the doors of the appliance, but it’s actually just an indication that something needs to be fixed inside. This can happen when there are too many creosote deposits in the chimney causing build-up and putting pressure against the damper door as it’s closing. When you hear this noise, open your firebox doors at least once per hour for ten minutes until no more smoke comes out of them after shutting down all flames.
After this, you can close your firebox doors and continue with your next session of burning wood.
If the clicking sound continues after properly cleaning out creosote build-up, then it could be a sign that dirt or ashes are stuck behind the damper door. If so, use a screwdriver to gently scrape them away before relighting the stove again. However, don’t force anything if you see some signs of rusting on the screws because they might break off inside which would require replacing parts in order for everything to work smoothly once more.
Why Does Metal Click When It Warms Up Or Cools In A Wood Stove?
One reason a wood stove makes metal clinking sounds is that it’s changing the shape of the pieces. When you heat and cool metals, they expand and contract — which can cause some parts to move closer together or away from each other while others stay stationary. This also leads to a buildup in crevices that will eventually lead to rust on your appliance, so be sure to keep up with proper cleaning after every use!
Sometimes when metals inside an appliance such as a gas furnace click-clack against one another, it means there isn’t enough airflow over them for cooling purposes. If this happens frequently, more lint may need clearing out of the duct system feeding into your unit (or even an update). Also, if the unit is heating up and cooling down too quickly, it can cause metal fatigue over time.
If you hear clicking coming from an oil furnace or cold air return (such as in a forced-air system), chances are there’s something wrong with your blower assembly — most likely it’s not working properly because of debris build-up on its fan blades. This could be caused by: A blocked filter; Leaves that have blown into an open vent; Dust and dirt buildup inside the ductwork; Birds or squirrels building nests around vents. There’s also a chance that there is another problem within your HVAC unit itself such as warped doors, bad bearings on fans, etc! In any case, don’t hesitate to call a professional to check it out.
If you’re hearing clicking in the cold air return of your furnace, be sure that all vent holes are clear and there aren’t any obstructions or blockages inside this area either. You can also try cleaning out the vents on your unit along with your ductwork for good measure too! If you have noticed more dust around recently, make sure to get an AC tune-up & inspection by scheduling one today!
And finally, if metal sounds like it’s moving together when opening or closing windows in wintertime (or anytime), don’t worry — they may just need lubrication. This is especially true for older units that haven’t been serviced. It could also mean they’re not seated properly in the window frame. This is an easy fix that won’t take more than a few minutes with some WD-40 or lubricant spray.
Just remember, when it comes to your HVAC system’s clicking sounds, there are many reasons why they occur — so be sure you have everything checked out by a professional if you think something could be wrong! Also, keep up on regular maintenance and cleaning for optimal efficiency throughout every season of the year!
Wood Stove Thermometers
The appliance is equipped with a thermometer – it’s typically located on the front of the stove, though some stoves have them at both ends. During use, the needle should be constantly moving to show how hot your wood stove is getting. Keep in mind that there are two types: a bimetal coil gauge and a floating ball one. They work differently so take time to learn about each type before buying one for your appliance!
If you hear a clicking sound, it may mean that the thermometer is broken. In this case, you should get a new one or have your appliance checked by an expert to avoid further damage. You can also try to clean the glass with some oil if there are no cracks in it – just make sure not to apply too much pressure because it might break! Also, keep in mind that you shouldn’t use any stove top cleaner on the device as they could potentially damage the gauge and even cause more serious problems over time.
Environmental Protection Agency (EPA)
The U.S. Environmental Protection Agency (EPA) has determined that wood stoves can be used as a means to reduce the negative environmental effects caused by other sources of fuel such as gas and oil, which release carbon dioxide into the air. The EPA also states that burning firewood releases fewer toxins than alternative fuels because its smoke contains fewer pollutants and is not contaminated with toxic chemicals like coal or kerosene.
This is helpful because it ultimately means that the amount of CO produced by burning wood in a stove is lower than other fuel sources. This also means though, that when working with firewood – there are specific things to look out for and aspects to take into consideration that can help reduce air pollution caused by them.
Wood stoves rely on an updraft created within the flue itself so that smoke moves through it freely without being able to escape into your home or greenhouse space. If this updraft isn’t happening properly, then you’re going to have issues with creosote buildup – not good! Creosote is a highly combustible material formed from unburned carbon particles resulting from incomplete combustion occurring inside any heated system where heat rises.
This buildup can cause your flue to become blocked, which is of course something you want to avoid at all costs. Blocked chimneys are one of the most common causes of house fires in this country – be safe and make sure that your wood stove isn’t causing creosote production!
Safety Tips for Wood Stoves
- Remember to keep a fire extinguisher nearby in case of emergencies.
- It is important that you have working smoke detectors on each floor where there are bedrooms, and carbon monoxide detectors in any room with an attached garage or near the furnace/boiler area. Remembering to test them regularly will help ensure they are fully functional when needed! Even if your stove doesn’t require one, consider investing in a CO detector just for safety reasons. It can be hard to tell what exactly causes high levels of CO because it has no odor or taste so this is another thing that should not be ignored even though it may seem like overkill at times!
- Make sure you have a fire extinguisher nearby in case of emergencies.
- It is important that each room has working smoke detectors and carbon monoxide detectors since it can be hard to tell what exactly causes high levels of CO, the detector will help ensure they are fully functional when needed! Even if your stove doesn’t require one, consider investing in a CO detector just for safety reasons. It does not have an odor or taste so this should not be ignored even though it may seem like overkill at times!
- Keep all flammable items away from the stove and make sure there is nothing on top of any electrical outlets around the area where you plan to set up your wood-burning stove. For example: Do not place a toaster or coffee maker over an outlet.
FAQs
Why is my woodstove making a clicking noise when I turn it on?
If you’ve ever noticed your new or old wood-burning stove make this strange “click, click, crackle” sort of noise while starting up then read on. We will attempt to answer all of these questions in hopes that we can help give some insight into what may be going wrong with your stove and how to fix it!
Is the clicking noise normal?
If your stove is making this clacking or cracking sound, it may be due to an abundance of moisture in the wood causing a chemical reaction. This click-clack noise can also happen if you’ve added too much paper (or other combustibles) inside your firebox leading up to starting it; however, that isn't as common. If there are any signs of water damage around where the door meets the frame then chances are high that excess moisture has built up over time and needs to escape before heating properly. There's no immediate danger with having extra moisture in wood but we do recommend removing all combustible material from within three feet outside of your combustion box per the manufacturer's directions.
How do I fix my stove from clicking?
Fixing a clicking wood-stove is fairly simple and can be done in one of two ways: either by opening your door to release the built-up moisture or increasing airflow through your chimney. The easiest way to solve this issue is when starting a fire, add dry kindling along with small pieces of split pine that act as kindling for ignition instead of crumpled newspaper. This will allow proper ventilation between logs while burning which should stop any further issues from occurring once you turn it on again! If you believe there may be too much pressure building inside then try turning off your primary air supply (which controls how much oxygen reaches the fire).
Conclusion
Is the clicking noise normal? No. If you notice this, try removing combustibles from around the stove and increasing airflow through your chimney.