How To Change The Bulb In An Electric Fireplace

It’s time to change the light bulb in your fireplace, but you don’t know-how. You may be thinking that it is something too difficult for you to do on your own. But there are many different ways of changing a light bulb in an electric fireplace without any trouble at all. This blog post will go over some of these methods and provide helpful illustrations so that anyone can easily change their light bulbs!

The first step is to turn off the power to the fireplace. To do this, turn off the breaker that supplies power from your electric panel or fuse box. Next, remove the lightbulb from its socket by twisting it counterclockwise and pulling it straight out. Now you can unscrew the old bulb and replace it with a new one. Be sure to screw in a bulb of equivalent size and wattage as what was being used before so that there is enough light for safety purposes!

Electric Fireplace Light Bulbs Not Working

The lamp is located in the back of the fireplace, generally behind a door. The bulb compartment will have screws on one side to open it up for replacement.

The glowing elements are also held together by thin wires so be careful when removing them!

Electric fireplaces are a great way to save money on energy. They do not require venting, and they give out the same amount of heat as a standard gas fireplace. However, they can be more difficult to maintain since you have control over all their settings manually.
One issue many individuals face is how to change the light bulb in an electric fireplace when it burns out or stops working altogether. This guide will show you step-by-step instructions for changing your own bulb with ease!

Where Is The Bulb In An Electric Fireplace?

The lamp is located in the back of the fireplace, generally behind a door. The bulb compartment will have screws on one side to open it up for replacement.

The glowing elements are also held together by thin wires so be careful when removing them!

Do You Need To Turn Off The Electric To Change A Bulb?

Locate the circuit breaker for your electric fireplace. If you are not sure of how to do this, consult with an electrician or turn off power at the main service panel in your home.

Once the power is off, you can change your bulb.

When changing a lightbulb in an electric fireplace, make sure it’s cool before touching any of the parts inside or removing anything from its housing.

Always wear protective gloves and eyewear to avoid getting burned by hot metal or glass. If possible, have someone help you hold onto the unit so that there isn’t damaged due to tipping over when replacing bulbs.

Pry out plastic housings with a screwdriver if they obstruct access to where the bulb screws into place on your indoor fireplace. You will need about ten minutes for this process depending on how many layers cover where the bulb goes. Use caution not to scratch up internal components as you remove pieces that are in the way of replacing your bulb.

Once you have access, remove the old lightbulb and replace it with a new one. Make sure to screw it tightly into place before putting all of the pieces back together again where they were originally located. Once everything is put back in its rightful spot, turn on the power at the circuit breaker or main service panel if necessary so that you can see your newly lit fireplace!

What Kind Of Bulb For An Electric Fireplace?

There are many different types of lightbulbs for electric fireplaces. Generally, if you’re changing the bulb in your fireplace because it has burned out or isn’t turning on at all, then any standard-sized CFL (compact fluorescent) bulb will do the trick! If you are changing the bulb because it is too dim, then look for a higher-wattage CFL equivalent. If you want more light even after installing an energy-efficient standard or high wattage CFL bulb, try replacing your old LED flame bulbs with new ones made by one of our fireplace manufacturers!

Save Money On Your Electric Bill By Replacing Bulbs In Your Fireplace

Over time regular lightbulbs will lose their brightness and can contribute to higher electric costs for both gas fireplaces and electric models alike. If your bulb burns out it’s probably best to replace it with another standard or high-wattage CFL equivalent instead of an incandescent one that requires significantly more electricity consumption per month! You’ll save money by purchasing just one replacement lamp rather than several over the course of a year due to frequent burnout.

Be sure to look for ENERGY STAR® approved lamps which will save you even more money on your electric bill since they meet strict energy-efficiency guidelines and ensure that each bulb is designed and manufactured with the same high standards of quality! Save time by using our convenient website’s product selector tool. It’s easy to use, just enter a model number from any manufacturer listed here and we’ll show you every part available!

How To Change The Bulb In An Electric Fireplace

A fireplace can make your home more cozy and warm. You may think that since it doesn’t have a flame, you don’t need to change the lightbulb. This will not be true for long because over time, heating elements are used which eventually getting burned out. Here is what you should do if the bulb in an electric fireplace goes out:

Turn off the power to your fireplace. You can do this by flipping a switch at the breaker box outside of your home or by disconnecting it from the outlet inside of the room.
Make sure you are wearing thick, sturdy gloves so that you won’t get burned when working with electricity. Also wear safety goggles for protection against sparks and broken glass should anything break while installing a new lightbulb.
Now take out all old parts surrounding where the bulb is positioned including screws holding up any panels in place over the top of it. The panel might be held down with clips instead if its material isn’t fragile like wood or plastic will be too thin to easily require using screwdrivers on. Take apart any such clips or screws that may be holding the panel in place.
Once this is done, you should see a small glass bulb made to fit there and surrounded by metal wirework for protection of it during frequent usage. If not, look at how lightbulbs are installed on electric fireplaces and follow suit with what would make sense based on your fireplace design (you could ask someone else if unsure).
Now get out a new bulb from where you have stored them away when moving into your home or recently purchased some more from an electronics store near you. Be sure to buy one which has been designed specifically meant for use inside of fireplaces so as to ensure its safe working conditions under extreme heat exposure will produce long-lasting results before needing to be replaced again.
Once you have the new bulb ready, put it into place by screwing it in or clipping around its base if possible. After this is done, move on to replacing surrounding parts of your fireplace back where they belong but don’t yet tighten any screws holding them down until everything has been placed correctly without anything out of line being visible which could distract from the rest of your electric fireplaces beauty and appearance at once.
Lastly, turn the power supply for your fireplace back on so that heat can resume emitting immediately after changing lightbulbs inside of an electric fireplace as soon as possible instead of having to wait too long before getting warmer temperatures coming through more efficiently than with one present taking up space there instead.

Turn off Power to the Fireplace

If you haven’t unplugged the fireplace, turn off its power at the circuit breaker panel. If there is a key switch on one of your electric fireplaces, lock it so that no further changes can be made to the settings or wiring.

Remove any Screws and Access Cover

First, remove the screws. Then use your fingers to pry off any plastic or metal access covers that are covering the bulb.

Replace The Bulb

Replace the bulb with an appropriate wattage lightbulb. Most electric fireplace bulbs are around 40 watts, but check the package for this information before you buy one. If it’s too dim or bright, you can always get another kind of bulb later on if need be.

There are a few different kinds of bulbs that can be used for an electric fireplace. The first is the traditional incandescent bulb, which looks like any other lightbulb and works in much the same way as well. Another type of bulb to use would be LED lights.

These bulbs come in all shapes and sizes too but tend to last longer than traditional led light strips do because they don’t get nearly as hot when turned on for long periods of time such as with fireplaces or some types of camping stoves. The third type of bulb is a halogen lightbulb.

These bulbs tend to be considered the most effective because they provide the most brightness and heat, which makes them perfect for an electric fireplace.

Put all Screws Back and Re-attach The Access Cover

If you have removed the access cover to change your lightbulb, make sure that all screws are in place before reattaching it. Then plugin and turn on your fireplace once more to make sure everything is working properly again.

Test Your New Bulb

Step one is to check your new bulb. Most bulbs should come with a wattage rating, which you’ll need for this step. Simply remove the old bulb and hold it up next to the replacement bulb. The numbers on each are likely different, so if they don’t match or are not visible make sure that you have the right type of lightbulb before continuing!

What If I Break A Wire?

If you break a wire while installing the new bulb, your fireplace will not turn on. This means it is time to call for professional help! Whether this means us or another electrician in the area, we recommend calling them as soon as possible so that they can determine if any wires are broken and/or repair them before another damage occurs.

It’s best to handle replacing light-bulbs with caution because there could be risks involved when removing anything from an electrical appliance. For example, touching live parts of the lamp housing may result in injury due to the high voltage present inside. You should also ensure that all power sources have been disconnected prior to handling replacement bulbs just in case something goes wrong.

FAQs

What should I do if the lightbulb in my electric fireplace is stuck?

You can either try to remove it by hand or use a pair of pliers. If you need help, ask someone for assistance! Don't force anything.

How do I remove the old lightbulb from my electric fireplace?

If you have a screw-type base, simply unscrew it. Otherwise, pull it out by hand or use pliers.

What is the best way to install an LED bulb into my fireplace?

If you have a screw-type base, simply unscrew it. Otherwise, pull it out by hand or use pliers. Install an LED bulb like how you would any other type of lightbulb. Some fireplaces come with instructions on changing your own bulbs; if not, follow these general steps for success! Find some clarification here.

How do I replace the part that holds the lightbulb in place?

Check to see whether there is a spring behind where the old bulb was located and then secure your new one into place using that same method (i.e., push down and twist). You can also try replacing just the glass cover instead of buying a full replacement.

Where do I buy a replacement bulb for my fireplace?

You can purchase an LED lightbulb online, in most hardware stores, and even in some grocery stores. If you're having trouble finding one that fits your specific model, ask for assistance at the store! For more information on what to look for when buying a new lightbulb, check here.

Where can I find the right lightbulb for my fireplace?

How do I know which lightbulbs will fit in my fireplace?

How do I install a new lightbulb in my fireplace?

Unscrew the old bulb and remove it by hand or with pliers. Install your LED bulb like you would any other type of light- bulb into place, then screw on the cap to secure it. Some fireplaces come with instructions for changing your own bulbs; if not, follow these general steps! Find some clarification here. For more information on what to look for when buying a new lightbulb, check here. Or find out about how to replace just the glass cover instead of buying a full replacement so that you don't have to purchase an entirely new unit.

What is the best way for installing an LED bulb into the fireplace?

If you have a screw-type base, simply unscrew it. Otherwise, pull it out by hand or use pliers. Install the LED bulb like how you would any other type of lightbulb into place and then twist on the cap to secure it in place. Some fireplaces come with instructions for changing your own bulbs; if not, follow these general steps! For more information on what to look for when buying a new lightbulb, check here. Or find out about how to replace just the glass cover instead of buying a full replacement so that you don't have to purchase an entirely new unit.

How do I change the part holding bulb in my electric fireplace?

Check to see whether there is a spring in place and then secure your new one into place using that same method (i.e., push down and twist). You can also try replacing just the glass cover instead of buying a full replacement if you're looking for an easier fix.

Conclusion

If you have an electric fireplace, chances are that at one point or another the lightbulb will go out. Luckily, changing a bulb in an electric fireplace is not difficult and can be done by anyone with minimal experience using tools.