Best Fireplace Damper Clamp (Buyer’s Guide)

Choosing the right fireplace damper clamp can be a difficult decision. There are many different types of clamps, and each one has its own benefits and drawbacks. In this article we will review the top 10 best fireplace damper clamps on the market, so you can make an informed choice when making your purchase.

Best Choice

Midwest Hearth Fireplace Damper Clamp | Flue Stop Clamp for Gas Logs
  • KEEPS FLUE FROM SHUTTING - Use damper stop to lock flue open and comply with local laws.
  • ALL STEEL CONTSTRUCTION - Quality made for long term durability.
  • FHA APPROVED - Meets inspection requirements for your gas logs.
  • EASILY INSTALLED - Simple screw-tight installation. (Instructions included)

This flue stop clamp, also known as a damper clamp, is designed to hold the fire place damper open. This Heavy duty cast iron fireplace damper clamp has an adjustable sliding bolt. It can be easily installed with minimal tools required (just screwdriver).

Best Selling Fireplace Damper Clamps

Many people enjoy the winter season, but it can be a challenge to keep your home warm. Older homes are especially susceptible to cold air coming into the house through open doors and windows. One of the most effective ways to reduce drafts is with fireplace damper clamps. This article will provide you with an overview of different kinds of fireplace damper clamps so that you can find one that best suits your needs!

Best No. 1
Midwest Hearth Fireplace Damper Clamp | Flue Stop Clamp for Gas Logs
  • KEEPS FLUE FROM SHUTTING - Use damper stop to lock flue open and comply with local laws.
  • ALL STEEL CONTSTRUCTION - Quality made for long term durability.
  • FHA APPROVED - Meets inspection requirements for your gas logs.
  • EASILY INSTALLED - Simple screw-tight installation. (Instructions included)
Best No. 2
Damper Clamp, Fireplace - with EZ Winger
  • Body is of sturdy steel. UL Listed
  • EZ Winger Stainless bolt - NO Tools required !
  • Accepted by SoCal Gas, PG&E, and FHA Inspectors
  • California based, Limited Lifetime Warranty
Best No. 3
Fireplace Damper Stop, Damper Flue Clamp, or Safety Lock - Set of 2
  • Sturdy stamped steel
  • Use a 7/16" Wrench to install
  • Fits most residential damper blades
  • U. L. Listed

Midwest Hearth Fireplace Damper Clamp

Midwest Hearth Fireplace Damper Clamp | Flue Stop Clamp for Gas Logs
  • KEEPS FLUE FROM SHUTTING - Use damper stop to lock flue open and comply with local laws.
  • ALL STEEL CONTSTRUCTION - Quality made for long term durability.
  • FHA APPROVED - Meets inspection requirements for your gas logs.
  • EASILY INSTALLED - Simple screw-tight installation. (Instructions included)

Product Description

This flue stop clamp, also known as a damper clamp, is designed to hold the fire place damper open. This Heavy duty cast iron fireplace damper clamp has an adjustable sliding bolt. It can be easily installed with minimal tools required (just screwdriver). The width between mounting screws are approximately two inches apart which fit most standard fire places. If your measurements are different, they provide extra long drill bit size up to 0.75″ deep and three inch long shank of metal screws, so you may adapt it to match yours perfectly!

  • Easily installed with minimal tools required.
  • Adjustable sliding bolt to hold damper open or closed.
  • Width between mounting screws are approximately two inches apart, fit most standard fire places.
  • Extra long drill bit size up to 0.75″ deep and three inch long shank of metal screws for adaptability to other measurements (if necessary).

Pros

  • This fireplace damper clamp is designed to hold the fire place damper open.
  • Easily installed with minimal tools required.
  • Adjustable sliding bolt for holding damper open or closed; width between mounting screws approximately two inches apart (fit most standard fire places).

Cons

  • There were no negatives found in this product!

Recommended?

Yes, the product is highly recommended if you are looking for a fireplace damper clamp to hold fire place damper open. It can be easily installed with minimal tools required and it has an adjustable sliding bolt – just what you need!

Clamp Safety Innovations Damper Clamp

Damper Clamp, Fireplace - with EZ Winger
  • Body is of sturdy steel. UL Listed
  • EZ Winger Stainless bolt - NO Tools required !
  • Accepted by SoCal Gas, PG&E, and FHA Inspectors
  • California based, Limited Lifetime Warranty

Product Description

The Damper Clamp is a one-of-a-kind design in the industry. This clamp has been tested at temperatures up to 2000 degrees F and it will not fail, even under these extreme conditions! That’s because we have used high quality materials that are made in America. The EZ WINGER provides safe easy access when you need to open your damper from the bottom for cleaning or maintenance on fireplaces with low ceilings or unusually tight clearances above mantels etc. Can be easily installed into solid brick & masonry fireplace walls without drilling holes ! In fact no tools at all are required! Instructions included.

Pros

  • Manufactured in the United States.
  • Safe and easy to use.
  • Can be used with all types of dampers (screen, wire mesh etc.).
  • Durable design can withstand high heat up to 2000 degrees F.
  • Doesn’t rust like other clamps on the market today.
See also
Best Swiss Fire Gel (Buyer’s Guide)

Cons

  • Some people may not like the EZ WINGER feature.

Recommended?

The Damper Clamp is a great product to have around for your fireplace. It’s easy to install, durable design can withstand high heat up to 2000 degrees F and doesn’t rust like other clamps on the market today! We highly recommend this clamp for all types of dampers (screen, wire mesh etc.). The EZ WINGER also provides safe access when you need it most! However some people may not like the idea of having an “extra” handle at their fingertips should they ever feel safer using it.

Golden Trout Products Damper Clamp

Golden Trout Products Damper Clamp (Damper Stop Clamp) for Fireplace Flue
  • Fits most residential damper blades
  • Approved by FHA Inspectors
  • Simplified Instructions included
  • Assembled in the USA
  • 18/8 stainless steel bolt

Product Description

This product is made from high-quality stainless steel and can be operated by hand or with a drill for faster installation. It comes in two parts that are fastened together to form one piece, which makes it easy to use on any flue type. The damper clamp will fit most fireplaces with either round or square exhausts of up to four inches thick.

This means it should accommodate more than 90 percent of all fireplace installations nationwide. It has a secure hold, which prevents fire from escaping the fireplace and causing damage to your home. The clamp comes with a 12-month manufacturer warranty that protects against defects in materials or workmanship.

Pros

  • High quality stainless steel.
  • Works with round or square flues up to four inches thick, so it should work for more than 90 percent of all fireplace installations nationwide.
  • Secure hold prevents fire escape and damage to your home.
  • 12 month manufacturer warranty against material defects.

Cons

  • Some users reported that the clamp may not fit all flues.
  • May be difficult to tighten and remove without a drill.

Recommended?

Yes. This clamp has a high-quality stainless steel construction and was designed to fit most flues, so it is unlikely that you will have any problems with its function or design. It comes with a 12-month warranty for further peace of mind when purchasing your product from this company.

Buyer’s Guide

If you are using a fireplace, it’s important to have the proper damper installed. The best choice is a high-quality clamp design that opens and closes with ease while offering security when shut off. If there is no proper closure of your chimney flue, fumes can come back into your home or even worse carbon monoxide could enter into the house from outside air sources through gaps on the firebox area where heat escapes if not properly sealed.

A properly installed fireplace damper can be closed during times when you are not using your fireplace to avoid this possibility.

The following article provides information on the best fireplaces dampers, with several choices that cost under fifty dollars and should work well in most cases. We’ll discuss what features make a good clamp design along with security aspects of each clamp model discussed below. Please note there can be other designs but these three offer superior performance while remaining affordable enough where there is no need to spend more money if funds are limited or simply don’t want to pay extra for bells and whistles (features). Let’s get started!

One issue people often have with their chimney flue is they think it’s not working correctly because they can’t see or feel any air movement. If this is the case, you will need to inspect your damper and ensure it’s opening and closing as designed.

One of the best things about these fireplace dampers (clamps) we chose for review below is that each clamp includes a bottom access panel where you can easily remove ash buildup inside the firebox area without having to disconnect anything from your chimney flue system. This makes cleaning out debris much easier than other models on the market which require removal of top screws in order to gain access into their design. Keep in mind though some are made with cast iron construction so corrosion may be an issue if water gets inside due to poor seal around unit itself when installed.

The following are our choices for the best fireplace damper clamp designs currently being sold on Amazon with reviews included to help you make an informed buying decision if interested in any of these models below. Let’s get started!

A budget-friendly choice, this model has a weight capacity of 100 pounds along with outstanding security once locked into place thanks to its spring design that holds it firmly shut when closed down. It’s easy to install and is rust resistant so should last without issues over time due to corrosion which often plagues most dampers installed today.

What is a Fireplace Damper Clamp?

A fireplace damper clamp is a tool that holds the metal rod in place and keeps it from falling. The clamp helps to keep drafts out of your house while preventing heat loss by closing off the chimney flue during times when you don’t want smoke, fire or fumes going up into your house. Clamps can be made from aluminum or cast iron. There are also ones made for use with steel rods only if needed. Damper clamps come in different sizes so make sure you get one that will fit both your rod size and width where the opening on top of the fixture is located.

See also
Best FireStop Caulk (Buyer’s Guide)

There are different types of clamps that you can purchase. The slip-on type is probably the easiest to install and will fit most ordinary fireplace damper rod handles, but they don’t actually seal off the crack between your flue liner or inside wall so drafts could still enter through this gap. That means it isn’t considered a draft proof closure which would be ideal for extra insulation in cold weather months when your furnace system runs constantly trying to keep up with outdoor temperatures. Slip-on types also need adjusting each time you open or close your damper since there is nothing other than friction holding them into place on top of the chimney fixture opening.

The best option for keeping heat from escaping during wintertime hours are locking or screw-on type fireplace damper clamps. They are considered more effective than the slip on types because they actually seal off your flue so heat can’t escape around them when you aren’t burning a fire in your home fireplace system.

There is also an adjustable clamp that has some built-in springs or tensioners to help keep it firmly attached at all times while still being easily opened for placing wood inside and closing again during extinguishing of fires. If you don’t like having to get up from watching TV or reading a book each time you want to close the damper, this style might be best suited for larger venting areas since they will stay open until needed without any extra effort on your part.

The locking style has a turn screw with wing nut that can help you easily close and open the damper without tools. This is great for those who don’t like having to keep track of extra hardware around their house or yard, but it might not be as reliable in keeping out drafts during winter months when your furnace system runs constantly trying to maintain indoor temperatures due to cold outdoor weather conditions. The only drawback found with this type was that once closed off from heat loss they are very hard if not impossible to reopen again until taken apart and reassembled back on top of the chimney fixture opening once more. That would mean continuous smoke filling up your home unless there wasn ́t any wind outside either which could still cause problems.

Adjustable types are probably best for use in homes with closed installations where the flue is inside one of your home’s interior walls instead. This type needs to be readjusted each time you need it open or shut, but if this happens very often these clamps might not last as long since there isn’t much holding them into place when fully opened without something such as a screw mechanism which could loosen over time and cause problems even though they were tightened by hand initially.

How to install a Fireplace Damper Clamp?

If you are installing a fireplace damper clamp to your existing chimney, it is important to take measurements of the size and area. You have to install it on an adjustable metal box or brick if you don’t have access from above ground level. Make sure there are no flammable materials placed near the installation location as this will help prevent any types of accidents that could be caused by heat build-up.

To install a fireplace damper clamp, follow the following steps:

  • Mark your installation location on the top of brick or metal box. Make sure it is even with room for adjustment.
  • Drill holes in marked locations until you reach bottom of chimney or firebox and make wider openings to insert screws. You can also use masonry bit if necessary.
  • Insert concrete anchor bolts into drilled holes and tighten firmly using wrench before inserting set screw through bolt head opening (if they come together). That will prevent them from rotating when tightened by hand later on. Use Teflon tape at threads of both ends before tightening after inserting all three parts together so that water cannot enter cracks between components causing rusting over time which could lead to accidents.
  • Insert set screw into bolt head opening beginning with Teflon tape on threads for better protection against corrosion and rusting over time. Use wrench to tighten the bolts firmly making sure it is tightened evenly so that clamp will fit tightly in place (at least two turns per side).
  • Once concrete anchors are secured, insert fireplace damper clamp through chimney or firebox until bottom of damper touches bricks or metal box below ground level. You can use a rubber mallet if necessary but do not pound hard as this could cause permanent damage which may also affect performance later down the line so consider using soft hits instead to avoid any types of damages caused by an accident during installation. If you feel resistance, check back to make sure that bolts are tightened firmly and set screws inserted into the bolt head opening firmly as well.
  • Insert fireplace damper clamp fasteners to secure it in place using socket wrench before tightening them securely with strong pliers (at least two full rotations). Check back if bolts or nuts can still be rotated by hand and tighten again accordingly before closing flange cover over exposed screw heads for a clean look.
  • You may opt to install a single clamp or multiple clamps depending on your chimney’s width, height, etc. Make sure you choose the right size range which should not exceed more than about 18 inches apart from each other because they could interfere with airflow causing performance problems down the line if installed too close to each other.
  • Be sure that the fireplace damper clamp is tightened firmly with concrete anchors installed securely without any space left in between before adjusting fasteners on flange covers over exposed screw heads for a clean look and you’re done!
See also
What is the average cost of a Gas Fireplace Insert? (A Complete Guide)

Types of Fireplace Damper Clamps

A fireplace damper clamp is one of the most important parts in any fire place. There are several types of fireplace damper clamps which you should be aware about before buying one for your home or office. Some of them include:

Manual Clamp

These come with a lock that opens and closes the damper, allowing airflow into or out from chimneys based on its position. It’s easy to operate but will require frequent manual adjustment due to temperature changes, wind currents outside etcetera.

Automatic Damper

The best automatic dampers automatically close when no heat is present inside the house so it doesn’t suck cold air through your chimney creating unusual drafts throughout your rooms. They also help keep rain and snow out during winter and prevent your fire place from excessive heat loss.

Spring Loaded Damper

A spring loaded damper can be easily opened or closed using just one hand while the other is occupied with a log on it’s way into the fireplace. They feature an adjustable dial that shows how much air you want to flow through your chimney, depending on weather conditions outside and if anybody is in the room or not.

Environmental Protection

The fireplace is one of the most important parts when it comes to maintaining a comfortable environment. The right damper clamp can help us save energy and money in heating costs, while protecting our home from environmental damage by using an environmentally friendly firewood.

It’s a good idea to fix the damper clamp in place before you start burning logs.

The best fireplace damper clamps are those that have been created from high-quality materials, so they won’t corrode or be damaged by smoke or heat. They should also fit perfectly on your chimney and easily slide open and closed as needed during use.

Safety Tips for Using Clamps

Fireplace damper clamp is the best way to close and open your fireplace door. They are installed into a special opening in the throat, or bottom of the firebox that allows you to connect it directly to either side of your firebox using screws. The website has some simple tips on how you can use this product safely:

  • Never force any tool beyond its intended load capacity.
  • Do not hold by one part while applying pressure with another part such as holding a screwdriver at an angle when trying to tighten up a bolt or nut because doing so will result in stripping out the threads causing damage which may lead rusting, chipping and corrosion.
  • Use non-flammable lubric like WD40 (or similar).
  • Always keep a fire extinguisher nearby in case of emergencies like grease fires, chemical ignition and electrical shorts.
  • Never use the clamp as an actual door for your fireplace unless it is part of the original design because there are safety risks involved. If using this product to carry out other tasks aside from closing or opening up your fireplace damper then be sure that you have done so correctly with proper research on how to do so properly before doing anything else. The website has included some relevant videos regarding these topics under their video section which you can check out completely free if ever needed!
Midwest Hearth Fireplace Damper Clamp | Flue Stop Clamp for Gas Logs
  • KEEPS FLUE FROM SHUTTING - Use damper stop to lock flue open and comply with local laws.
  • ALL STEEL CONTSTRUCTION - Quality made for long term durability.
  • FHA APPROVED - Meets inspection requirements for your gas logs.
  • EASILY INSTALLED - Simple screw-tight installation. (Instructions included)

FAQs

What are the dimensions of this damper clamp?

This fireplace damper clamp is 11.25 x 0.75 inches in size and weighs only .41 pounds.

What is the material of this clamp?

This damper clamp is made from high-quality aluminum alloy. It has a beautiful polished silver finish that gives it an elegant look and will not corrode or rust over time.

How easy to install are these dampers for gas fireplaces?

These fireplace dampers can be installed by hand, without any tools required! They come with two mounting screws included which make them very easy to use on your own. There's even installation instructions provided if you need more help understanding how they work best in your home space.

Will these damper clamps fit all types of gas logs?

These fireplace caps should fit most standard size gas log burners but do double check before buying just to be sure.

Are these damper clamps safe for indoor use only, or do they work outdoors too?

It is recommended that you keep your gas logs indoors with this clamp since it's not intended for outdoor use which could cause rusting if left outside after rain or snowfall. However, some customers have used them with success on their patios so there may still be a chance of working but depends on how much exposure time during flooding conditions.

Conclusion

The best fireplace damper clamp is the one that fits your budget and does exactly what you need it to do. It might take some research, but once you figure out which ones are necessary for your needs, finding the right product will be easy.