When you install a fire pit into your outdoor space, you should also make sure that you have a spark screen. Why? A spark screen is made from wire mesh and can keep sparks, embers, and flying ashes inside the pit instead of them wandering around and potentially setting other outdoor elements ablaze.
Fire safety is the most important thing to keep in mind when you’re going to light a fire, and a spark screen is one of the best ways to keep your cozy fire safe and under control. Ideally, the spark screen should prevent you from getting too close to the fire and it should fit securely over the pit.
A spark screen should be weather resistant so you can leave it over your fire pit when you aren’t using it. There are a variety of fire pit spark screens available, ranging from circular that have to be lifted off of the fire pit to hinged ones that can be round or square. Finding the best fire pit spark screen to fit your pit and your convenience is important.
Finding the right size and shape fire pit spark screen shouldn’t be too difficult since they come in so many different shapes and sizes. You need one that will contain the sparks, ash, and embers that also isn’t difficult to handle. The easier you can move and use the spark screen, the better off you will be.
Fitting a spark screen to your fire pit is pretty easy, you just need to measure the diameter of where you want the edges to sit. Some manufactured fire pits come with a screen that fits perfectly into a lip around the bowl, but if you’ve built your own fire pit, you might want to make sure you have a secure spot to be able to fit it down into.
The best one you could purchase would be the Sunnydaze Outdoor Screen that is round because it has the best ratings and is larger than some others, which makes it easily suitable for homemade fire pits.
Sunnydaze does it again with this round, heavy-duty steel fire pit spark screen. It’s available in two sizes, 30 inches, and 36 inches, with both sizes being 7.5 inches tall. There is no assembly required, and it comes with a handle on top so you can move it easily. It weighs in at seven pounds, so it’s heavy enough to stay put on the fire pit but light enough to move with little effort. Based on the specifications and the fact that it comes with a warranty, this Sunnydaze fire pit spark screen is the best one to buy.
- Comes with a warranty
- Heavy enough to not blow away, but light enough to easily move
- Reinforced steel
- No assembly needed
- It may be slightly warped upon arrival
- Handle lays down so lifting with tools might be slightly difficult
- Some reviewers said it rusted after just a few uses
Sunnydaze Fire Pit Spark Screen Cover Outdoor Heavy Duty Steel Square Firepit Lid Protector – Comes With a Warranty
This Sunnydaze spark screen is made with steel and reinforced with the same material. It’s square-shaped and has steel strips that cross over from corner to corner as well as around the bottom edges. The reinforcement helps the screen last longer and keep it from becoming misshapen from use.
It is built with a ring on top for easy lifting and is lightweight at 4.6 pounds. It’s 31 inches across and stands 7 inches tall, so there is plenty of room for your fire underneath it. The spark screen also comes with a one-year warranty from the purchase date, so you can buy it without worrying.
- Made of steel
- Comes with a warranty
- Ring on top for easy lifting
- Will not work for a round fire pit as well
- Some reviewers say it rusts very quickly
- It may separate from the reinforced steel strips
- Some buyers say it came smaller than the dimensions it should have been
If you have a little square fire pit, this might be the perfect screen for you to use. Some reviewers have had some issues with the product showing up at their door dented or missing the ring on top, and some complained of the product rusting very quickly. Other reviewers said that the screen was much smaller than the dimensions listed on the product page, being about six inches shorter than it states. Based on the reviews of the product, it might be a bit questionable.
The Sunnydaze Easy-Opening Fire Pit Spark Screen Cover is a very easily accessible with hinges that allow you to open it without removing it. It is taller than many standard spark screens, standing at 15 inches tall, allowing you to stack firewood higher inside your fire pit.
It comes in three different diameters, so it can fit several different fire pits, as long as they are round. It’s made of steel with reinforcement and has a handle on top for easy movement if you don’t want to open it by the hinges. One side is roughly an inch shorter than the other to accommodate the space needed to open it. The screen weighs in at 8 pounds, so it’s heavy enough to stay on the fire pit yet easy enough to move around.
- Easy to maneuver
- Comes in different sizes
- Taller than most standard types
- Handles on the top and the side of the screen that opens
Made of steel
- Mesh may push away from reinforcements
- A gap between the screens may allow sparks, embers, and ash to escape
- Some reviewers said it was smaller than stated in the description
If you want to have easy access to the fire pit without needing to move the spark screen each time, this one is a good choice since it has the hinges for you to open it without moving it. It’s reinforced, so that could be helpful for maintaining the shape, and it’s tall enough that you can put more wood under it than most spark screens.
While the gap between the two halves of the screen may allow sparks to escape. It’s still a more convenient product than many other spark screens. The different sizes that are available make it easier to find one that will fit your fire pit, but you’ll need to account for some discrepancies in the stated size and the actual size. Sunnydaze gives a one-year warranty for all of their products as well, so if something is amiss you can talk with customer service about it.
The Dagan Industries fire pit spark screen is a pretty standard. It’s durable, reinforced, and has a handle on the top. It’s lightweight, coming in at just three pounds, and fits best on a Dagan Industries fire pit. It only comes in a 31-inch diameter and stands about 7 inches tall, but works well with your outdoor decor. Being so lightweight could potentially be a downfall of the product because it may blow away in a strong wind.
- Handle for easy lifting
- Only comes in one size
- Is only made to fit Dagan fire pits
- May rust easily
This particular screen may work for your fire pit, but it has an odd diameter compared to other ones and does not offer other sizes. The product description says that it is a durable product, but some reviewers say it rusted and warped very quickly.
It does have a handle on top so you can move it easily, and it’s very light. If you already have a Dagan brand fire pit, then this spark screen might be the perfect option, but if you have a different sized fire pit, this one won’t work well with it.
Good Directions has produced a spark screen that has three available sizes and is made of powder-coated steel for extra durability. It’s reinforced like many other spark screens with the steel strips crossed over. It has a handle on top as well. Some reviewers are very happy with the thickness of the steel as it is thicker than a lot of standard screens. It also has about the same height as most screens, being about six inches tall.
- Comes in different sizes to fit multiple fire pits
- Powder-coated steel stands up to heat
- Dimensions are pretty standard
- Heavy-duty, so it has thicker steel than standard
- Some reviewers say it rusts easily
- Might warp quickly
This fire pit spark screen just might be a perfect addition to your outdoor entertainment space. It only weighs five pounds, so it’ll be easy to move around when you need to. Being about the same height allows it to work just as well as any other spark screen, and the reinforcement keeps it holding up to the high temperatures from the fire. Heavy-duty screens are built to last longer, and they’re made with thicker materials, so they hold up better compared to thinner, standard ones.
Buying a spark screen to cover your fire pit is a good idea for being able to enjoy sitting around the fire pit safely. You need one that will fit your fire pit properly, so checking and double-checking measurements is an important part of finishing your set-up. You’ll probably want a screen made of steel since the material is sturdy and won’t burn up easily.
You’ll also need to consider the weight and how easy it will be to use it. The shape and the height of it are also important so that you can judge how high you want to stack your fire and have the spark screen be the correct shape for your pit.
If your spark screen doesn’t fit properly, you raise the risk of having a fire hazard become an accident that could have been prevented. Safety is the most important aspect to consider when you’re thinking about getting a fire screen, whether it’s your first one or a replacement for one that you already have.
The size of your spark screen is important because if you purchase one that is too small for your fire pit, then you risk the fire hazard of having sparks and embers escape or the spark screen not covering the fire or the fire pit.
Measure and check your measurements of your fire pit so that you can search for a spark screen that will be the right size. Many brands offer screens of different sizes, so you can find the best brand that offers the size you need.
You might want to look into spark screens made of highly durable materials such as steel. You won’t want a screen that gets the first bit of heat and melts or warps. Steel can handle high temperatures because it has a naturally high melting point and the mesh designs will catch the hot sparks to keep them from igniting another fire elsewhere.
Reinforcing the screens is also a great idea so that the screen won’t just fall apart over your fire. You’re most likely going to expect long-term use out of it, and the more durable the material it’s made of, the longer it will last.
A spark screen that is too heavy will make it hard to move, but a spark screen that is too light might have some issues staying on the fire pit if there is a big gust of wind. You’re going to want to make sure that you have a long tool suitable for lifting the spark screen by the ring or handle attached to the top, and if the screen is too heavy, you may have a hard time lifting it.
If you aren’t one to build huge fires, then a shorter, more standard screen is perfectly acceptable. However, if you prefer larger fires, you’ll want to look for one that stands taller to accommodate extra wood.
Using a taller fire pit spark screen might be easier than a shorter, more standard spark screen because it makes it easier to access the fire pit with a hinged panel. You should also check into how the manufacturer measures the diameter of the spark screen because they may use a metric system or include width for any attached handles.
It is also recommended that before you put the spark screen to flame you spray it with a heat-resistant coating or paint. Doing so will help prevent rusting and peeling of manufacturer paint, so you can use the screen longer. You’ll just need to be sure you don’t spray it too heavily so that you don’t fill the holes in the mesh.
Be sure to keep a fire poker or other long tool with a hook so that you can lift the screen. It will get hot while sitting over the flame and you won’t be able to pick it up with your bare hands, and using fire-resistant gloves may not be enough protection if you come too close to the flames.
Never place the screen between yourself and the fire pit while you’re adding burning material to the fire pit. The last thing you’ll want to do is step on or trip over the screen because you risk burning yourself. If you’re carrying burning materials, you may not be able to see the screen on the ground, so it’s safest to place to put it is away from your path.
Why Do Fire Pits Need Spark Screens?
Fire pits need to have a spark screen to keep hot embers and ash from flying into you, your friends, and family, your pets, and even your landscaping. If the fire pops and emits sparks, the sparks could potentially ignite the grass around the fire pit and create an unsafe area. Spark screens are especially important if you live in an area where wildfires are common.
What is the Best Material for a Spark Screen?
The best material that you can use for a spark screen is steel because it maintains its integrity best with high heat. Be wary of coated steel spark screens, though. The coating could melt off and that allows the metal to rust, so you won’t get as much use out of them.
Can I Build My Own Fire Pit Spark Screen?
You absolutely can, and it’s not very hard. All you need is some steel mesh, a steel or iron ring, and a couple of strips of sheet metal. You’ll need to weld the sheet metal strips to the ring, then cover the dome with the steel mesh and secure it. Make sure to measure everything so that you have enough material and your spark screen will fit the way you want it to.
How Long Will My Spark Screen Last?
If you choose one that’s very high-quality, and you care for it the right way, you can expect it to last for several years. If you choose one of lower quality and leave it outside all year round, you should expect it to rust, and you’ll have to decide when it’s time to replace it.
Will My Spark Screen Come with a Tool for Lifting It?
If you’re buying a whole new fire pit, it most likely will. If you’ve had to buy a spark screen separately and the fire pit didn’t come with one, you’ll have to purchase one separately. Make sure to have one on hand before you use the spark screen over a fire.
Spark screens are necessary to maintain fire safety standards. We would suggest the Sunnydaze Outdoor Fire Pit Spark Screen Cover Guard Accessory. You should make sure that it fits your fire pit properly for it to be as effective as possible. Also, you never want to touch it with anything other than a proper fire poker with a long handle. You should be sure to brush up on fire safety so that you keep the right tools nearby for tending to your fire pit and keep it under control.
Be sure to consider the size, material, and height of any spark screen that you might be considering. These are very important factors for helping you decide which one to purchase. The Sunnydaze Outdoor Screen takes the cake here because it’s built to last and comes with a warranty. It suits standard fire pits, is available in more than one size, and is made with materials that are perfect for containing your fire. It’s round and has good dimensions so that you have space to build your fire.