Fireplace Dampers (User Guide)

When it comes to fireplace dampers, there are a lot of questions. How do you know which one is the best? Which ones come with warranties? What are their differences? This blog post will answer these questions and more. We’ll cover the different types of dampers available, how to install them, what they’re used for, and why you need them!

Fireplace dampers are an often overlooked, but essential part of the fireplace system. They control airflow to and from the firebox and chimney flue, protecting your home from damage due to overheating. This guide will cover everything you need to know about dampers: how they work, what their benefits are for homeowners, which ones we recommend here at Fireplace Supply Company–and more!

What Is A Fireplace Damper And How Does It Work?

A fireplace damper is a metal or wood plate that sits in your chimney. It’s located between the firebox and the flue. The damper works with your vents to control airflow in and out of your home, which helps you regulate heat in different parts of your living space. When you’re not using it, most dampers are closed so that they seal shut when there’s no active fire burning inside of them.chimney

How Do You Use A Fireplace Damper?

Depending on the style of your damper, you can use it in two different ways: manually and automatically. The exact process will depend on which type of dampers you’re using. Manual dampers lie flat across both sides of a fireplace opening, so they need to be lifted by hand when open and lowered back into place with the help of gravity when closed.

Automatic fireplaces require more complex installation than manual ones do because there’s an additional piece – called a blower fan kit – that needs to go in between the venting system and the chimney itself for them to work properly at all times. This means that automatic damp may not be compatible with older fireplaces. Automatic dampers lift and lower themselves automatically as the fire burns, depending on whether or not flames are visible outside of them at a given time.

What Is The Definition Of A Fireplace Dampener?

A fireplace damper is a metal plate that can be closed to prevent heat from escaping your home, and cold air from entering. They are an important part of any fireplace. They can also be door-like in shape and open and close like a trapdoor.

A damper is set into the chimney, usually located on or near the roofline of your home (though some dampers may be placed at other levels as well). When closed, it prevents heat from escaping through the chimney. This saves energy during those cold winter days when you need all that heat inside to avoid freezing! The fireplace damper needs routine maintenance too because if it isn’t working properly then there could be more problems such as fire hazards so make sure it’s checked regularly by professionals every year.

  • It’s not just for looks either – many homeowners choose their style based on how effectively they work to keep out drafts while preserving enough airflow for a fire.fireplace

A fireplace damper is an integral part of your wood-burning or gas fireplace, and it’s important to know how they work so you can determine whether yours needs repair or replacement. If you have never noticed them before, the dampers are typically located at the top of the chimney flue (the pipe that leads from inside your house up through your roof).

There are two types: one-piece and two-piece. One-piece dampers make installation simpler because they don’t require separate parts; however, opening and closing these single units requires more effort than their counterparts do. Two-piece systems usually come as a pair with one on each side of the chimney opening, which makes them easier to open and close, even with a fire blazing in the fireplace.

Types of Fireplace Dampers

The damper is an important part of your fireplace; this is because it can stop heat from escaping through the chimney when not in use (which will save you money) but also let enough air flow for a good fire to burn inside. Homeowners must understand the different types so they know what type they need if there are problems or replacements needed! There are two main kinds: Standard dampers: These common units fit into metal plates on top of the chimney flue that slides open and closed with long levers or cranks. They’re usually installed at roof level, which makes them easy to access for routine maintenance.

Why Is It Called A Fireplace Damper?

A damper is a metal plate that closes the chimney flue when it’s not in use. Before electricity, this was an important safety feature because it limited airflow and allowed you to safely close your fireplace for extended periods of time without worrying about carbon monoxide poisoning or other dangers.

Today, many homes still have them as part of their custom home fireplaces simply for convenience’s sake! There are some situations where even if there isn’t any real danger involved keeping the damper closed can be beneficial to you (we’ll get into those later).

The name fireplace damper comes from the fact that it is a metal plate, or “damper”, which closes off your chimney flue when you are not using your fire. Before electricity was common in homes (and even today), this feature made sense because it could limit airflow to reduce the risk of carbon monoxide poisoning if someone went too long without stoking their fires. Today, many people still have them for convenience sake! There are some instances where keeping the damper closed can be beneficial; we’ll talk about those later on in this article.

Where Is A Fireplace Damper Located?

A fireplace damper is located in your chimney. It prevents heat from leaving the house through the chimney, which makes it crucial for energy efficiency. Chimneys are also an important safety feature of a home because they help prevent carbon monoxide poisoning by venting dangerous gases outside where you can breathe them safely.

What Is A Chimney Damper Used For?

A chimney damper is a piece of metal that opens and closes to control the draft going up into your home’s chimney. A balanced flue system requires a fireplace damper at every opening, including on the top of vents and stovepipes as well as inside each room with an open fireplace. Each one must be closed when it isn’t being used for fireplaces or wood stoves to prevent exhaust from entering living spaces through these openings. In addition, you should make sure all exterior openings are covered with screens made specifically for outdoor use – not those intended only for indoor grates!Fireplace Hearth

What Is A Flue Damper Used For?

A flue damper is used to regulate the flow of air when a fireplace is not in use. It will prevent heat and smoke from escaping up the chimney but allow for fresh air to enter your house during the winter months or while you are using your fireplace. While not every home needs to have one, they can be very helpful if you want to protect against energy loss through an open chimney on cold nights.

What Is The Difference Between A Flue And A Damper?

– A damper is used to close off the flue pipe inside of your chimney. This stops air from going up and down through the chimney system. Knowing how to use a fireplace flue or damper correctly will help you control airflow, which can be difficult during cold weather when you want that extra heat (and don’t want all the smoke).

  • A flue is a chimney, and it’s the tube in your fireplace where smoke and other byproducts exit.

Does A Fireplace Need A Damper And Is It Necessary?

  • Yes, a fireplace needs a damper. A flue will still work without one, but smoke and carbon monoxide can be an issue if you don’t use a chimney with the right kind of dampers.
  • Fireplaces should always have a functional, working flue system that includes both vents or dampers – generally at least two per flue pipe size. The upper vent is called the “top intake” while the lower vent is known as the “bottom exit.”

Do All Chimneys Have A Damper?

All chimneys have a damper, but not all dampers are created equal. Fireplace manufacturers use different methods to secure the damper in place and some are better than others for their specific units. The most common method is using metal screws that securely attach it into place without any additional hardware needed. Other brands may need additional installations such as brackets or chains just to hold them down properly which can be quite annoying if you want to clean your fireplace after each use.

Does A Wood Burning Stove Need A Damper?

Yes, absolutely! A fireplace damper plays a vital role in regulating the amount of air that enters your wood stove. Here is an analogy to help you understand why: imagine a balloon on top of a straw. You blow into it until there is no more room for air left inside, so it pops up and down every time you breathe in or out. This is exactly what happens when you open & close your dampers- opening them will allow more fresh oxygen into the fire which makes it burn brighter while closing them will restrict airflow making it smaller.Fireplace Hearth

How To Use A Chimney Damper

A fireplace damper is a metal plate that closes the chimney when not in use. The main purpose of this device is to prevent heat loss and downdrafts by closing off the flue of your chimney, most often during the summer months or cold weather times. On average, homeowners check their dampers about once every two years (which means they are usually closed), but many people never even look at them!

Dampers should be checked for cracks or other damage regularly; if you smell smoke coming into your home through any part of your property’s ventilation system it could very well be caused by poor airflow due to broken dampers (or even missing ones!) Once opened up like good little soldiers, good luck getting them to close again!

How Does A Chimney Damper Work?

Fireplace dampers are found inside the chimney of a fireplace. These work like valves that allow you to control airflow into your home-based heating appliance. When open, air flows freely through the damper and up the chimney; when closed, little or no air is allowed through.

To work properly, dampers must be sized and installed correctly for your appliance.

See also
How to make a Natural Gas Fire Pit Burner?

Without a properly sized damper, heat will escape your home and go up the chimney instead of into your living spaces.

Is My Chimney Damper Open or Closed?

The most common mistake people make is leaving their damper open, which allows the warm air inside your home to escape. If you’re not doing this on purpose then it’s always best to check whether or not it actually closed properly after you’ve used the fireplace.

You can do this by placing a lit candle in front of and slightly behind where the chimney flue meets with your main exhaust vent – if there’s no breeze, and it doesn’t go out quickly, then chances are that you have an issue with fire breathing back into your room during burn sessions!

How To Open And Close A Fireplace Damper

  • To open a fireplace damper, raise it to the highest level. You can also turn a screw or knob but you should not rely on this as other parts of the system may break first.
  • To close a fireplace damper, lower it until it fits snugly in the frame. There should be no gap between the frame and your hand when you try to push down on any part of it with medium force.
  • Keep in mind that dampers are not adjustable so if this does not work for you then there is something wrong with them or they have already evolved into their final form.

How To Use A Flue Damper

A flue damper is a manual device that allows you to close off the flow of combustion air from your fireplace. A flue damper can be used to turn on and off your fire without opening windows or doors, but it also means venting heat up the chimney when not in use. This wastes energy heating cold outdoor air instead of warm indoor space during winter months. Flue dampers are typically located high above the floor inside fireplaces where they’re out of reach for pets and children, who might play with them unknowingly resulting in blocked airflow at peak times such as fireside gatherings or chilly evenings!Fireplace Hearth

  • Opening a Damper: To open a flue damper by hand requires some strength because you’ll be pushing against a strong spring.
  • Closing a Damper: Once opened, the damper will remain open until you close it manually with your hand or by turning a handle that reopens the flue and lets air in from outside of your home once again. You can also use an automatic mechanism that allows for remote-controlled opening and closing while keeping animals and children safe at all times! This option is ideal if you want to keep doors closed when not home, such as overnight during winter months when walls begin to cool down inside.

Open during fireside gatherings but closed otherwise so heat stays indoors instead of going up the chimney wasting energy on cold outdoor air – Flue dampers are typically located high above the floor inside fireplaces where they’re out of reach for pets and children, who might play with them unknowingly resulting in blocked airflow at peak times such as fireside gatherings or chilly evenings!

How Does A Flue Damper Work?

A flue damper works by closing up the chimney when you don’t want to allow airflow. This prevents heat from escaping and may also prevent mildew or water damage as well.

A flue damper consists of a spring-loaded metal plate that closes off an opening in your fireplace, stove, furnace, or boiler. The amount that it opens determines how much airflow passes through the device at any given moment. When closed completely it should be impossible for smoke or fumes to escape into your home – even if there is a fire roaring inside! A flue damper can only open fully; however, they do not stay open automatically unless attached with duct tape (see below). They typically attach via hinges on one side and swinging shut on the other.

Most dampers are made of steel and they may be painted to match your existing decor or left in their natural state for a rustic look. Some flue dampers can even expand automatically, like an umbrella – this is especially useful if you’re leaving home and aren’t sure how long it’s been since your fire went out (they will close fully when not used).

Is My Flue Open Or Closed?

  • You can tell if your flue is open or closed by blowing into the fireplace. The updraft will cause a fire to flare up and burn brighter with an open flue, but you’ll just see smoke coming out of the chimney if it’s closed.

How To Open And Close A Flue Damper

The most important thing to remember about damper control is that you should always start with the flue shut and open it last. Most of the time, when you’re closing a fireplace damper, it will be either on or off (closed). This means that all heat from your fireplace goes up your chimney instead of into your house.

The best way to tell if this is happening in your home is by checking for a smoke at any cracks around windows or doors leading outside. If there’s no smoke then you know everything’s going out as intended! Other times, dampers may need adjustment so they don’t allow too much air back down into a room while still allowing enough oxygen to keep a fire alive and burning properly.

Fireplace Damper Parts

A damper is a metal and/or wooden panel that blocks the flow of air into or out of an area. It can be used to control airflow through chimneys, ducts, attics, and other ventilation openings. There are many different types of dampers for specific applications; some operate automatically while others require manual opening and closing.Fireplace Hearth

There are two main types of fireplace dampers: static and adjustable. Fireplace static dampers remain in position, usually to control the airflow through a chimney flue when no fire is burning. Adjustable dampers can be closed part way or all the way so that either more or less air enters the chimney system depending on what you want at any given time. For example, if it’s cold outside but there’s no wind, an adjustable damper might only need to be opened slightly for the adequate draft to help carry away fumes from your home heating appliance without wasting too much-heated room air up the chimney stack. However, if it’s very windy outdoors and you have reason to believe this will cause problems withdrawing, the adjustable damper might need to be closed all the way.

Fireplace Damper Plate

The damper plate is located at the top of your fireplace, just below the flue. The metal disc slides up and down to open or close off the opening into the chimney. When closed properly, it forms an airtight seal that keeps out smoke and harmful gasses while still allowing heat from a fire to escape up through the chimney so you can enjoy their warmth indoors.

More importantly, when left open it allows dangerous gases like carbon monoxide (CO) to flow back inside rather than escaping up through your chimney where they are no longer a threat. Carbon Monoxide poisoning claims hundreds of lives every year including young children who may not recognize its symptoms as quickly as adults do! That’s why having working fireplace dampers and using them properly is so important.

Fireplace Damper Handle

The damper handle hinges are the most important part of your fireplace damper. They allow you to open and close it easily whenever needed, but they also ensure that when closed, the damper is sealed securely so all smoke stays in your home where it belongs.

Hinge options include: Butt-Hinged Damper – These dampers have a single hinge on one side which attaches directly to either the bottom or top frame members inside the fireplace opening. This style has an advantage over mortise-housed hinges because there is no interference with surrounding material at its joints.

Mortise-Hed Damper – A mortised hinge only requires two screws into framing studs behind masonry or firebrick veneer, but requires more installation work because the damper must be mortised into place between framing studs. The multi-hinged style is also advantageous to other hinge types, as it allows for easier adjustability should you need to fine-tune its opening and closing.

Multi-Hinged Damper – This style combines Butt Hinge with Mortise or multi hing styles, making them easily adjustable while maintaining a secure seal when closed.

What Is A Fireplace Damper Clamp?

A fireplace damper clamp is a specialized hardware that can be attached to the flue of your fireplace. Its purpose is to prevent airflow in and out of the chimney flue when your fire isn’t on, essentially closing it off so warm air doesn’t go up into the home.fireplace

A fireplace damper clamp is a specialized hardware that can be attached to the flue of your fireplace. Its purpose is to prevent airflow in and out of the chimney flue when your fire isn’t on, essentially closing it off so warm air doesn’t go up into the home.

What are the main types of dampers?

Fireplace dampers control airflow in a chimney or venting system. The two most common types are rotary damper and linear damper.

Rotary Damper: A round, perforated metal plate with an adjustable hinge so it can block off one part of the opening to create smaller openings when closed fully for no airflow through the fireplace and larger holes when open at different angles so more smoke flows up and out of the firebox.

Linear Damper: This type is made from sheet steel which has been bent into a U-shape that closes against itself like a sliding door on top of your stovepipe/chimney flue allowing only enough room for warm smoke to rise above it.

What is a rotary damper?

A rotary damper manages the airflow in a chimney or venting system. Rotary dampers can be fully closed to block all airflow, open at varying angles for partial airflow, and have adjustable arms that control the width of ventilation openings from no visible light through small slits to large holes with better visibility into your firebox. Available as rectangular boxes that attach directly onto outside wall surfaces or round metal plates installed inside an existing fireplace opening which are attached by screws around its perimeter (see images).

What is a linear damper?

A linear damper is made of sheet steel bent into U shape so it closes against itself like a sliding door on top of stovepipe/chimney flue allowing only enough room for warm smoke to rise above it.

See also
How To Open An Electric Fireplace?

Linear dampers are available as rectangular boxes that attach directly onto outside wall surfaces or round metal plates installed inside an existing fireplace opening which are attached by screws around its perimeter (see images).

There is a wide range of linear dampers from small, basic models suitable for use with gas fireplaces and solid fuel stoves up to the more complex types that can be used on wood-burning appliances too. Linear damper controls should never be opened when there’s no burning going on because oxygen will flow freely into the combustion chamber causing back-drafting – this leads to increased carbon monoxide levels inside your home since unburned gases escape through your flue system instead of being properly used up in the fire burning inside it.

To avoid this problem always make sure to close down all main airflow controls on your appliances before opening linear dampers for any reason – even just to briefly look through them when no active fires are going, if you notice significant changes in their position while doing so stop using them immediately since they may be jammed or stuck shut because debris has accumulated around them blocking airflow completely! Linear damper hardware should also be checked regularly and replaced whenever needed to keep vents open freely without obstruction. Be aware that an active flame can burn nearby combustible materials too including old gaskets around dampers which have become brittle over time.

Are there any safety concerns I should know about when using my fireplace?

Fireplace dampers prevent heat and smoke from escaping up and out of your chimney and venting system. This can lead to backdrafts which are dangerous and should always be avoided.flue

The National Fire Protection Association (NFPA) estimates that 50% of all house fires in the USA start due to a blockage or improper installation of fireplace, wood stove, or gas-fired flue vents. These problems often happen when users remove their dampers for cleaning without first closing down the main airflow controls on their appliance until they’re finished with this type of maintenance task; another common mistake is installing defective damper hardware like loose screws, worn hinges, etc.

If you do not own an automatic vent/damper control device installed within your chimney systems make sure there’s no debris blocking airflow by removing any obstructions using stiff wire brushes, vacuum hoses, or a damp towel.

Close all main airflow controls on your wood, coal, or gas-fired appliance before opening up the fireplace/stove flue to clean it out properly; after completing this task always make sure you close down these same appliances again before igniting them for use. Finally, inspect and replace any worn hardware that may be causing venting problems with rotary damper screws that are loose, etc. since an open flame can quickly ignite nearby combustible materials including old gaskets around dampers which have become brittle over time.

Should A Fireplace Damper Be Open In Summer?

  • No. Fireplaces are closed in the summer because it is not necessary to open them and they can lose more heat than you may think. Since your heating system needs a large amount of air, opening your fireplace damper will allow warm exterior air into your home, which does not need to be heated by the furnace again!

Should A Fireplace Damper Be Open All The Way?

This is a common question that new homeowners have when they get their fireplaces installed. Some people don’t understand what the damper does for them and others simply haven’t been taught how to use it properly. The function of this part is fairly straightforward actually, and you should be able to close yours in such a way as to allow smoke in but not back out. This allows your home’s heating system (which pulls air from inside) to work more efficiently by pulling warm air into the fireplace rather than cold outdoor air coming down through it instead.

Should A Fireplace Damper Be Closed When Not In Use?

When it comes to fireplaces, dampers are what control the airflow into or out of a chimney. A damper is designed to remain open when there is no building pressure on either side, which allows for a maximum draw without creating too much back-drafting. The more efficient your fireplace burns and the better its insulation, the less need you have for closing off this channel between inside and outside.

Fireplace Damper Won’t Open Or Closed

It is very annoying when you are trying to enjoy a warm fire in your fireplace, but the damper won’t open or close! Nothing can be more frustrating than that. Damper issues are one of the most common problems people have with their wood-burning appliances and if not taken care of on time, they end up costing lots of money as well.

Few things need to be checked before considering calling any professional for help: First, check whether there is enough draft coming from the chimney or outside by opening windows nearby. If it doesn’t resolve the problem then try lighting a small flame inside the fireplace so that smoke gets pulled out throthe ugh flue system rather than going back home. Open the door of the stove/fireplace so it’s pulling the air from the room rather than pushing the smoke back inside.

The most common reason for dampers not opening or closing is that they are stuck due to dust, soot, etc. There can be few other reasons too which need to be checked by professionals who have experience in handling these problems: Damper may get rusted and frozen in the open position. If you have recently added insulation it could cause the damper to malfunction as well. Dampers usually do not work when electric heat is used along with a fireplace or stove.

These are some of the possible causes why your damper does not want to close! Sometimes there can also be problems because of a loose handle on the fireplace door which makes it difficult for users to open/close doors easily.

Another problem that may be occurring is when the flue pipe gets narrow or turns in such a way, that there is no suction/draft present to pull smoke outside. This usually happens because of low height chimney without proper airflow inside it which results in incomplete combustion and inefficient burning process.

One can always check whether the damper works properly by lighting a small fire inside the fireplace with the wind blowing towards the front door so it’s pulling out all smoke rather than pushing it back into the home. If you are still unable to get your dampers working then call local professionals who will come up with an effective solution for the same!

Can You Add A Damper To A Fireplace?

You can add a damper to your fireplace, and it’s not as hard of a task as you might think. But before we go over the steps, let’s first discuss why someone would want to install one in their chimney system.

Can A Fireplace Damper Be Replaced?

If your damper is broken, it may need to be replaced. Damper replacement involves removing the old one and installing a new unit in its place. The do-it-yourself method of replacing this device takes some experience as well as safety precautions that must be taken before you start work on the fireplace. If you’re uncomfortable with making those types of repairs yourself, hire a professional who can replace these dampers for you instead.

How Much Does It Cost To Replace A Damper?

The cost to replace a damper will vary depending on the size of your chimney and if you can do it yourself or not. The price range for this job is usually between $50-$150, but that can go up if there are more complicated factors involved with installing new dampers in large fireplaces.

Alternatives To A Fireplace Damper

When it comes to your fireplace, there are many different options for a flue damper other than the standard pull-down metal piece. Depending on what type of chimney you have and even where you live can determine which style will work best for you. There is no right or wrong choice as long as everything that needs to be closed off from smoke stays closed until someone opens it up again! Here are some choices:

Chimney Balloon

It’s actually made out of recycled plastic bottles and has been endorsed by the EPA. This goes into place at any height because its flexible design allows homeowners not only to close their chimneys but also direct how much airflow is present through them when they want more heat in during the winter seasons.

Chimney Balloon with remote control

This is very similar to the previous model but has the added feature of being able to clear out smoke from your home at any time you want so everyone can breathe easier!

Mechanical Air Injection System (MAIS) Frame Damper

These dampers are typically used for wood stoves and inserts, rather than fireplaces since they don’t work well in that format. They greatly reduce creosote buildup because it injects air into them while still containing heat inside when it is closed off during non-use times. It also lets carbon monoxide escape through vents without allowing oxygen in like other types of flue systems do which could be unsafe when sitting dormant.

Power Roof Vent

For those with flat rooftops, this type of damper is perfect because it’s installed on the roof and requires no power to use. It simply fits into place like a chimney cap would but has an added feature of opening up whenever there is high air pressure outside that forces itself open against its inner frame which contains springs. Once the system closes off again thanks to low air pressure or lack thereof, then you can burn wood for heat without worry about smoke being sucked out through your home due to negative pressures from windy conditions!How Hot Does a Fireplace Get?

Solar Powered Damper

This product uses solar energy as a way to allow airflow in and out during times when sunlight exists so it doesn’t have to rely on batteries alone. It also moves in two different directions so you can control where heat escapes or which direction smoke goes when the fireplace isn’t being used for its intended purpose!

Thermostat Controlled Damper

This is a great product that you don’t even know exists because it comes with your chimney system unless someone removed it during the installation of their fireplace insert or wood burner. Its sole purpose is to send information about temperatures inside and outside of your home back and forth between them while making sure not too much air gets in when there are no flames present but still allowing airflow out easily once they start up again, maximizing efficiency without having creosote buildups over time.

See also
What Is Needed For An Electric Fireplace?

Wall Mount Damper

These are great for fireplaces that have been converted to gas because they connect directly into your home’s heating system or furnace ventilation. They help circulate air throughout the house while still being able to close off at times when you aren’t using them so heat remains in one area during colder months, which saves money on energy bills!

Wired Remote Damper

This type of damper is controlled by remote control outside and inside the home depending on where it was installed after the installation was complete with all necessary components like electricity running through wiring properly to operate each direction. It also has many different variations as well such as ones that can be opened manually rather than just automatic ways of doing things if homeowners don’t want to use remote control.

Wood Stove Damper

This type of damper is typically used on wood-burning fireplaces and inserts to keep heat inside when the fireplace isn’t in use as well as controlling airflow during those times as temperature fluctuations naturally occur throughout different seasons as we all know! It also helps reduce creosote buildup over time because smoke escapes through vents rather than having no place for it to go which could be dangerous if not properly monitored or contained with some kind of venting system like this one.

Manual Damper

This damper is exactly what it sounds like, a manual type of system that allows you to open and close the damper based on your desire for airflow in or out rather than being automatic. It has no moving parts because there are vents built into its frame which contain springs so they don’t have to rely solely on electricity or human power to function properly! These are great if homeowners want full control over how much air goes in and out during different times throughout the year when using their fireplace insert.

Electric Damper

This type of damper uses electricity to open and close the vents inside of it depending on how much or little heat there is in your fireplace insert. It can be installed as an extra piece for those who already have a gas fireplace but want more control over airflow through their chimney, which helps reduce creosote buildup by allowing proper flow rather than just closing off completely when not being used!

Manual Hand Crank Damper

Sometimes homeowners don’t need full venting capabilities because they would like to avoid too much air getting out at times so this product allows them some limited abilities while still controlling airflow based on time throughout different seasons as well as certain amounts of wood-burning without having all smoke escape out of the chimney.fireplace

Double Damper

This type of damper is a good idea for homeowners who have their fireplace insert installed in an area that is shared with another room or space. They use two dampers fitted into one large opening, which can be opened and closed from both sides to control airflow between them depending on what they would like to do when using their fireplace! It’s also great if you want to add some kind of gas heating onto your system later down the road because it allows more options without having walls torn down unless necessary!

Blocking Damper

This type of damper can be used as a replacement or an addition to your current fireplace insert because it will block off the chimney completely when not in use. It is typically installed on wood-burning fireplaces and inserts but can also work with gas if homeowners want less energy usage for heating their home during colder months! They are great because they require no installation at all, which makes them easy to install even where there isn’t much room like between two walls that already exist either inside or outside the house!

Gas Valve Control Venting System

Oftentimes homeowners will choose this system over other types unless wanting very specific features that others provide such as controlling airflow by opening and closing dampers or adjusting how much airflow is coming into the home from outside depending on what’s available. It works with a remote control that allows homeowners to adjust settings as necessary throughout different times of the day so they don’t have to go near their fireplace insert to mess with it!

Electric Vent Damper

This type of damper uses an electric motor and fan system, which can be programmed through your smartphone if you choose this option when purchasing instead of using a manual style damper because it has no moving parts at all except for its vents that open and closes based on temperature fluctuations inside your fireplace instead. These are good for those who want automation without having any kind of remotes involved but want some amount of control over airflow.

Vent Free Damper

This damper is one of the best options to choose if you want something very easy to install (no extra parts necessary) and don’t mind having any control over how much air gets in or out through your chimney at all! It has vents that are permanently open during usage, which means they will not close when high levels of smoke or heat enter into them as other dampers might do because there isn’t any kind of safety system built within this type as some others contain! They work by working with their gas flow alone rather than trying to reduce it once the fireplace insert is turned on unlike other products available for purchase these days.

Multi-Position Gas Control

This type of damper works with a specific gas line and is typically used on natural gas fireplace inserts that homeowners want to be able to control how much airflow enters their home based on what they’re doing throughout the day. They can be set up through your smartphone, which allows more features than some other types allow because there are no remotes needed for operation! These are good if you have an automated system in place within your house already or would like one installed later down the road as well since it doesn’t require too much knowledge about electronics that work alongside fireplaces.

Dual Damper Manual Crank System

If you don’t care too much about automation and like the idea of controlling your fireplace manually because that’s what you would do if it was a regular, wood-burning fireplace then this type might be best to go with! It has no electronics involved and requires people who purchase them to use their hands instead of remotes or other types of sensors for operation. They come in different sizes as well so make sure you know how big yours should be before purchasing an incorrect one!

Single Damper Manual Crank System

This is another manual crank system but works by opening and closing dampers on its own rather than having users control the airflow directly themselves via cranking it open and closed when necessary through a handle attached to the damper itself. Homeowners can decide whether they want to install one inside their fireplace or outside so it’s not very easy to tell what kind of damper you should buy for your home without knowing the specifics surrounding its installation.

Dual Damper Remote Control System

If you want convenience and automation but don’t like the idea of having something installed within your chimney that can be accessed through a smartphone then this might be right up your alley! It has dampers that close when smoke levels are high to reduce how much heat enters your home, which makes them great if safety is important while using fireplaces because they make sure there aren’t any major accidents due to overheating. Remotes allow users who purchase them to control the airflow at all times throughout the day so you can keep it closed when no one is home, for example!

Dual Damper Remote Control System w/ Smart Phone App

A lot of homeowners prefer this type because it has all the great features that come with a regular remote control system but allows them to have even more flexibility thanks to having an app installed on their smartphone. They work best in homes where someone always stays at home and would like to be able to remotely open and close airflow depending on what they’re doing during certain periods throughout the week or month if desired.

Three-Way Damper System

This type of damper is great for homeowners who want to be able to control how much airflow enters their home based on the time of year and what they’re doing at a given moment. The three-way system allows people with these types installed in their homes to turn off airflow during the colder months when it isn’t necessary, which means you can save money by not having heat enter into your home from fireplaces that aren’t being used.fireplace

They’re also good if someone already has an automated system within their house because the two work together well without causing too many conflicts or problems along the way! You must know where each part should go before installation so nothing gets connected incorrectly!

Dual Damper Two Way System

When homeowners purchase this type of damper they’re able to control how much heat leaves their home when using fireplaces throughout the year. It’s a great product for someone who wants to be in complete control over what’s happening with airflow at all times since it has dampers that close off airflow completely when smoke levels are too high, which can prevent major accidents from occurring within homes where people use them frequently during winter months! They work best if you have an automated system installed already or want one put into place later on down the road because they don’t require knowledge about electronics and sensors that go alongside fireplaces.

Conclusion

Knowing the types of dampers that are available to homeowners is important before making any decisions because you want to make sure they’re able to do what you need them to without causing too many problems.